Forum Linux Mint Polska
[SOLVED] HP Pavilion dv7 - Wersja do druku

+- Forum Linux Mint Polska (https://forum.linuxmint.pl)
+-- Dział: Wsparcie (https://forum.linuxmint.pl/forumdisplay.php?fid=203)
+--- Dział: Instalacja i uruchamianie (https://forum.linuxmint.pl/forumdisplay.php?fid=132)
+--- Wątek: [SOLVED] HP Pavilion dv7 (/showthread.php?tid=780)

Strony: 1 2 3


HP Pavilion dv7 - gbk77 - 13-02-2020

Przez kilka lat działał bez problemów z kolejnymi Mint'ami (od 14 do 18).
Ostatnio pojawił się problem z HDD - są dwa dyski po 1 TB.
Sformatowałem gparted'em partycję 400 GB pod instalację 19.3
i przygotowałem oraz ISO na DVD 4,7 GB.
Ciężko się instalije DVD - Live ale... jakoś dostaję prawidłowy pulpit.
Jednak pełna instalacja zawiesza się na "4 kropce" instalatora
- przy wyborze/instalowaniu różnych narzędzi.
Nie pokazuje się dysko z wolną partycją - gotową do instalacji.
Kilka podejść z tym samym skutkiem.
Ewidentnie szwankują dyski ale.. mam nadzieję zainstalować 19.3 na wybranej partycji
przed formatowaniem był tam jakiś nieużywany Linux (może Arch).
Proszę o pomoc w zainstalowaniu 19.3


RE: HP Pavilion dv7 - dedito - 13-02-2020

Skoro uważasz, że szwankują, to zamieść tablicę smart dysku.


RE: HP Pavilion dv7 - gbk77 - 13-02-2020

Skoro uważasz, że szwankują, to zamieść tablicę smart dysku.
[/quote]
Dzięki. A tak więcej technicznie a mniej żargonowo,
czyli co zrobić po kolei i przy pomocy czego?


RE: HP Pavilion dv7 - dedito - 13-02-2020

Tablica SMART dysku to określenie jak najbardziej techniczne.
W sesji live jest dostępny program graficzny gsmartcontrol.
[Obrazek: Workspace-1_094.jpg]


RE: HP Pavilion dv7 - gbk77 - 13-02-2020

Dzięki wielkie,
nie zauważyłem i nie doceniłem tego narzędzia
żargonowo zabrzmiało mi tylko "zamieść tablicę smart dysku".


RE: HP Pavilion dv7 - yahoob3 - 13-02-2020

Zainstaluj program, np. poleceniem sudo apt install gsmartcontrol, uruchom test:
[Obrazek: LoE3OGhl.png]

a kiedy skończy wrzuć na forum (kliknij View output) to, co się wyświetli... coś jakto:
Kod:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-38-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     SPCC Solid State Disk
Serial Number:    AA000000000000002231
Firmware Version: R0817A0
User Capacity:    256,060,514,304 bytes [256 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Feb 13 17:54:44 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (  120) seconds.
Offline data collection
capabilities:              (0x11) SMART execute Offline immediate.
                    No Auto Offline data collection support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    No Selective Self-test supported.
SMART capabilities:            (0x0002)    Does not save SMART data before
                    entering power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  10) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0032   100   100   050    Old_age   Always       -       0
  5 Reallocated_Sector_Ct   0x0032   100   100   050    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   050    Old_age   Always       -       1267
12 Power_Cycle_Count       0x0032   100   100   050    Old_age   Always       -       707
160 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       0
161 Unknown_Attribute       0x0033   100   100   050    Pre-fail  Always       -       100
163 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       16
164 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       8284
165 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       29
166 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       6
167 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       17
168 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       7000
169 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       100
175 Program_Fail_Count_Chip 0x0032   100   100   050    Old_age   Always       -       0
176 Erase_Fail_Count_Chip   0x0032   100   100   050    Old_age   Always       -       0
177 Wear_Leveling_Count     0x0032   100   100   050    Old_age   Always       -       0
178 Used_Rsvd_Blk_Cnt_Chip  0x0032   100   100   050    Old_age   Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   050    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   050    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   050    Old_age   Always       -       20
194 Temperature_Celsius     0x0022   100   100   050    Old_age   Always       -       40
195 Hardware_ECC_Recovered  0x0032   100   100   050    Old_age   Always       -       17441
196 Reallocated_Event_Count 0x0032   100   100   050    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   050    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0032   100   100   050    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   050    Old_age   Always       -       0
232 Available_Reservd_Space 0x0032   100   100   050    Old_age   Always       -       100
241 Total_LBAs_Written      0x0030   100   100   050    Old_age   Offline      -       32958
242 Total_LBAs_Read         0x0030   100   100   050    Old_age   Offline      -       37602
245 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       30402

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      1267         -

Selective Self-tests/Logging not supported

Pamiętaj, żeby użyć znaczników CODE - przepis w mojej sygnaturze.


RE: HP Pavilion dv7 - gbk77 - 13-02-2020

(13-02-2020, 17:04)dedito napisał(a): Tablica SMART dysku to określenie jak najbardziej techniczne.
W sesji live jest dostępny program graficzny gsmartcontrol.
[Obrazek: Workspace-1_094.jpg]
Zastosowałem tego smarta ale... zasadniczo nie wykrył dużych problemów (skrócone testy, bo pełne wymagają kilku godzin). Nie ma tam żadnego zamiatania. Wykonałem te testy nie z 19.3 Live ale z odpalonego w trybie recovery 18.1. Nie wiem czy to pomoże w zainstalowaniu trwałego Mint'a 19.3. Próbuję...


RE: HP Pavilion dv7 - dedito - 13-02-2020

Jak mamy przeanalizować ten zlepek tekstu?
Już lepszy byłby zrzut graficzny.
Przy okazji pokaż też zakładkę atributes.

Przy okazji jeszcze jakbyś te żargonowe zamiatanie przetłumaczył na język techniczny ?


RE: HP Pavilion dv7 - gbk77 - 14-02-2020

Przepraszam, źle zrozumiałem zamieść (od zamiatać, umieść byłoby bardziej jednoznaczne).
Poniżej wyniki testów dla obu dysków
Kod:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:    TOSHIBA MK1059GSMP
Serial Number:    Y1MGP1P1T
LU WWN Device Id: 5 000039 3a290aa9c
Firmware Version: GU001C
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:    512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:  ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Feb 14 00:24:08 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status:      (  0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (  120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: (  2) minutes.
Extended self-test routine
recommended polling time: ( 252) minutes.
SCT capabilities:       (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate    0x002f  100  100  050    Pre-fail  Always      -      0
  2 Throughput_Performance  0x0027  100  100  050    Pre-fail  Always      -      0
  3 Spin_Up_Time            0x0023  100  100  002    Pre-fail  Always      -      3121
  4 Start_Stop_Count        0x0032  100  100  000    Old_age  Always      -      6623
  5 Reallocated_Sector_Ct  0x0033  100  100  010    Pre-fail  Always      -      40
  7 Seek_Error_Rate        0x002f  100  100  050    Pre-fail  Always      -      0
  8 Seek_Time_Performance  0x0025  100  100  050    Pre-fail  Offline      -      0
  9 Power_On_Hours          0x0032  016  016  000    Old_age  Always      -      33942
10 Spin_Retry_Count        0x0033  232  100  030    Pre-fail  Always      -      0
12 Power_Cycle_Count      0x0032  100  100  000    Old_age  Always      -      5510
183 Runtime_Bad_Block      0x0032  100  100  001    Old_age  Always      -      0
184 End-to-End_Error        0x0033  100  100  097    Pre-fail  Always      -      0
185 Unknown_Attribute      0x0032  100  100  001    Old_age  Always      -      65535
187 Reported_Uncorrect      0x0032  001  001  000    Old_age  Always      -      2077
188 Command_Timeout        0x0032  100  092  000    Old_age  Always      -      388
189 High_Fly_Writes        0x003a  100  100  001    Old_age  Always      -      0
190 Airflow_Temperature_Cel 0x0022  066  042  040    Old_age  Always      -      34 (Min/Max 27/36)
191 G-Sense_Error_Rate      0x0032  100  100  000    Old_age  Always      -      156563
192 Power-Off_Retract_Count 0x0022  100  100  000    Old_age  Always      -      7667829
193 Load_Cycle_Count        0x0032  080  080  000    Old_age  Always      -      200862
196 Reallocated_Event_Count 0x0032  100  100  000    Old_age  Always      -      5
197 Current_Pending_Sector  0x0032  100  100  000    Old_age  Always      -      0
199 UDMA_CRC_Error_Count    0x0032  200  200  000    Old_age  Always      -      0

SMART Error Log Version: 1
ATA Error Count: 2237 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2237 occurred at disk power-on lifetime: 9865 hours (411 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 0a 08 74 c7 63  Error: UNC at LBA = 0x03c77408 = 63403016

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 20 08 00 74 c7 40 00      01:12:34.284  READ FPDMA QUEUED
  60 08 f8 e0 2a 68 40 00      01:12:34.258  READ FPDMA QUEUED
  61 08 f0 d0 c5 03 40 00      01:12:34.258  WRITE FPDMA QUEUED
  ec 00 00 00 00 00 a0 00      01:12:34.203  IDENTIFY DEVICE
  61 20 e0 78 22 70 40 00      01:12:34.170  WRITE FPDMA QUEUED

Error 2236 occurred at disk power-on lifetime: 9865 hours (411 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 6a 08 74 c7 63  Error: WP at LBA = 0x03c77408 = 63403016

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 40 c8 40 36 2d 40 00      01:12:30.439  WRITE FPDMA QUEUED
  60 08 c0 e0 2a 68 40 00      01:12:30.425  READ FPDMA QUEUED
  60 08 b8 70 31 68 40 00      01:12:30.424  READ FPDMA QUEUED
  60 08 b0 88 2e 68 40 00      01:12:30.420  READ FPDMA QUEUED
  60 08 a8 60 31 68 40 00      01:12:30.419  READ FPDMA QUEUED

Error 2235 occurred at disk power-on lifetime: 9865 hours (411 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 8a 08 74 c7 63  Error: UNC at LBA = 0x03c77408 = 63403016

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 20 88 00 74 c7 40 00      01:12:25.731  READ FPDMA QUEUED
  61 08 80 28 c4 64 40 00      01:12:25.231  WRITE FPDMA QUEUED
  61 20 78 c0 df 86 40 00      01:12:25.231  WRITE FPDMA QUEUED
  61 20 70 20 40 bb 40 00      01:12:25.231  WRITE FPDMA QUEUED
  60 20 68 20 c4 64 40 00      01:12:25.230  READ FPDMA QUEUED

Error 2234 occurred at disk power-on lifetime: 9865 hours (411 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 f2 08 74 c7 63  Error: UNC at LBA = 0x03c77408 = 63403016

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 f8 10 e6 d4 40 00      01:12:20.865  READ FPDMA QUEUED
  60 20 f0 00 74 c7 40 00      01:12:20.865  READ FPDMA QUEUED
  61 20 e0 40 3c bb 40 00      01:12:20.865  WRITE FPDMA QUEUED
  61 08 08 d0 c5 03 40 00      01:12:20.865  WRITE FPDMA QUEUED
  ef 90 03 00 00 00 a0 00      01:12:20.865  SET FEATURES [Disable SATA feature]

Error 2233 occurred at disk power-on lifetime: 9865 hours (411 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 d2 08 74 c7 63  Error: UNC at LBA = 0x03c77408 = 63403016

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 20 d0 00 74 c7 40 00      01:12:17.068  READ FPDMA QUEUED
  61 18 c8 e0 e3 4b 40 00      01:12:17.066  WRITE FPDMA QUEUED
  60 18 c0 c0 ae e9 40 00      01:12:17.065  READ FPDMA QUEUED
  61 08 b8 d8 e3 4b 40 00      01:12:17.065  WRITE FPDMA QUEUED
  60 08 b0 b8 ae e9 40 00      01:12:17.065  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline      Completed without error      00%    33942        -
# 2  Short offline      Completed without error      00%    33942        -
# 3  Short offline      Completed without error      00%    33936        -
# 4  Short offline      Completed without error      00%    33936        -
# 5  Short offline      Completed: read failure      90%      7390        834289152
# 6  Short offline      Completed without error      00%        50        -
# 7  Short offline      Completed without error      00%        41        -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Kod:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:    TOSHIBA MK1059GSMP
Serial Number:    Y1MGP1P2T
LU WWN Device Id: 5 000039 3a290aa9d
Firmware Version: GU001C
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:    512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:  ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Feb 14 00:08:39 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (  120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: (  2) minutes.
Extended self-test routine
recommended polling time: ( 239) minutes.
SCT capabilities:       (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate    0x002f  100  100  050    Pre-fail  Always      -      0
  2 Throughput_Performance  0x0027  100  100  050    Pre-fail  Always      -      0
  3 Spin_Up_Time            0x0023  100  100  002    Pre-fail  Always      -      3118
  4 Start_Stop_Count        0x0032  100  100  000    Old_age  Always      -      8929
  5 Reallocated_Sector_Ct  0x0033  098  098  010    Pre-fail  Always      -      376
  7 Seek_Error_Rate        0x002f  100  100  050    Pre-fail  Always      -      0
  8 Seek_Time_Performance  0x0025  100  100  050    Pre-fail  Offline      -      0
  9 Power_On_Hours          0x0032  016  016  000    Old_age  Always      -      33875
10 Spin_Retry_Count        0x0033  253  100  030    Pre-fail  Always      -      0
12 Power_Cycle_Count      0x0032  100  100  000    Old_age  Always      -      5492
183 Runtime_Bad_Block      0x0032  100  100  001    Old_age  Always      -      0
184 End-to-End_Error        0x0033  100  100  097    Pre-fail  Always      -      0
185 Unknown_Attribute      0x0032  100  100  001    Old_age  Always      -      65535
187 Reported_Uncorrect      0x0032  100  100  000    Old_age  Always      -      0
188 Command_Timeout        0x0032  100  097  000    Old_age  Always      -      210
189 High_Fly_Writes        0x003a  100  100  001    Old_age  Always      -      0
190 Airflow_Temperature_Cel 0x0022  071  047  040    Old_age  Always      -      29 (Min/Max 22/37)
191 G-Sense_Error_Rate      0x0032  100  100  000    Old_age  Always      -      50654
192 Power-Off_Retract_Count 0x0022  100  100  000    Old_age  Always      -      23724394
193 Load_Cycle_Count        0x0032  086  086  000    Old_age  Always      -      141892
196 Reallocated_Event_Count 0x0032  100  100  000    Old_age  Always      -      40
197 Current_Pending_Sector  0x0032  100  100  000    Old_age  Always      -      6864
199 UDMA_CRC_Error_Count    0x0032  200  253  000    Old_age  Always      -      0

SMART Error Log Version: 1
ATA Error Count: 28296 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 28296 occurred at disk power-on lifetime: 33873 hours (1411 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 08 00 00 00 e0  Error: ABRT 8 sectors at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 00 00 00 e0 00      02:37:04.906  READ DMA
  ef 10 02 00 00 00 a0 00      02:37:04.898  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      02:37:02.786  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:37:00.676  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      02:37:00.675  SET FEATURES [Enable SATA feature]

Error 28295 occurred at disk power-on lifetime: 33873 hours (1411 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 08 00 00 00 e0  Error: ABRT 8 sectors at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 00 00 00 e0 00      02:36:54.164  READ DMA
  ef 10 02 00 00 00 a0 00      02:36:54.164  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      02:36:52.053  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:36:49.942  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      02:36:49.942  SET FEATURES [Enable SATA feature]

Error 28294 occurred at disk power-on lifetime: 33873 hours (1411 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 08 00 00 00 e0  Error: ABRT 8 sectors at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 00 00 00 e0 00      02:36:43.431  READ DMA
  ef 10 02 00 00 00 a0 00      02:36:43.431  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      02:36:41.319  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:36:39.209  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      02:36:39.208  SET FEATURES [Enable SATA feature]

Error 28293 occurred at disk power-on lifetime: 33873 hours (1411 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 08 00 00 00 e0  Error: ABRT 8 sectors at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 00 00 00 e0 00      02:36:32.686  READ DMA
  ef 10 02 00 00 00 a0 00      02:36:32.686  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      02:36:30.575  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:36:28.464  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      02:36:28.464  SET FEATURES [Enable SATA feature]

Error 28292 occurred at disk power-on lifetime: 33873 hours (1411 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 08 00 00 00 e0  Error: ABRT 8 sectors at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 00 00 00 e0 00      02:36:21.953  READ DMA
  ef 10 02 00 00 00 a0 00      02:36:21.953  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      02:36:19.841  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:36:17.730  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      02:36:17.730  SET FEATURES [Enable SATA feature]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline      Completed: read failure      90%    33874        0
# 2  Short offline      Completed: read failure      90%    33870        0
# 3  Short offline      Completed without error      00%      7300        -
# 4  Short offline      Completed without error      00%      7300        -
# 5  Short offline      Completed without error      00%      445        -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.



RE: HP Pavilion dv7 - dedito - 14-02-2020

Spójrz na parametry 5, 196 i 197, jak się zmieniły w tych dwóch testach.
Dla mnie ten dysk już nie nadaje się na system.
Jak te atrybuty dalej będą rosnąć, to dysk nadaje się do utylizacji.